How Much Bandwidth Is Too Much For Your Business??

For your company's specific business applications....how do you decide on how much bandwidth will be necesary? Is it T1, DS3, or OC3 or greater? Do you factor in a reasonable overage to account for potential emergent situations? What modeling approach do you use to calculate your min and max load and thus your supportable need range? How do you decide how much is "enough"?

I suggest to address these issues that you apply an end to end approach. The parts are the workstation, communication link(s), server, database, and support systems (DNS for example).

Next, its important to remember that users do tasks. Any analysis must be based on the task concept. Also, the specific tasks in any application will likely differ by user type so its useful to look at the frequency of specific tasks by user group.

Each task can be looked at in terms of time. The total time is split among the parts. Before worrying about bandwidth, you should determine just where the time is being spent for each task. Don't consider the user action in the task analysis - their keyboard time is best handled with scripts to eliminate that variable, and output is done when the screen is populated or the printout complete.

The communications aspect is impacted by volume of data moved, amount of communications overhead, background load, packet size, protocol, latency, and bandwidth.

While there are many "favorite" tools to speed the analysis, it can all be accomplished with a spreadsheet, a packet capture tool, and a knowledge of scripting.

There are some generals you can follow for this evolution.

First, while applications vary, most have yet to find the application that improves performance on any task when bandwidth goes above about 750Kb. Most see no improvement once bandwidth reaches 200Kb. Additional bandwidth then becomes an issue of user count. Next, most applications do not suffer performance drops until total average utilization goes above 80%.

The best time to define bandwidth requirements is during application development. The reason is that most applications can be tuned to perform with significantly less traffic while still in development, and the traffic is often a good indication of other problems like poor database structure or less than optimal distribution of work. The second best time is before purchasing an application. Often two similar applications will have significantly different WAN performance characteristics and this can be a key decision criteria.

So how much bandwidth is too much? If you can lease less than you currently have and lower your costs, you have too much.

I strongly suggest that you NOT enter directly into discussions with a bandwidth provider while deciding your bandwidth requirements. They're more likely to be focused on "making a sale" than in helping you with your infrastructure decisions. Instead, seek the advice of an independent unbiased broker. They can walk you through the process to finding a solution which best makes business sense to you and your organization.

Michael is the owner of FreedomFire Communications....including DS3-Bandwidth.com and Business-VoIP-Solution.com. Michael also authors Broadband Nation where you're always welcome to drop in and catch up on the latest BroadBand news, tips, insights, and ramblings for the masses.

Ez 4g
Streamyx
Streamyx
Streamyx SOHO
Business Broadband
Streamyx Business
Packages Home Basic Or Business Broadband
Packages Home Basic Or Business Broadband
Packages Home Basic Or Business Broadband
Streamyx Combo
Streamyx
Streamyx TMpoint
Streamyx Online Registration
Register Online%20home%20or%20business
Streamyx

How Much Bandwidth Is Too Much For Your Business??

For your company's specific business applications....how do you decide on how much bandwidth will be necesary? Is it T1, DS3, or OC3 or greater? Do you factor in a reasonable overage to account for potential emergent situations? What modeling approach do you use to calculate your min and max load and thus your supportable need range? How do you decide how much is "enough"?

I suggest to address these issues that you apply an end to end approach. The parts are the workstation, communication link(s), server, database, and support systems (DNS for example).

Next, its important to remember that users do tasks. Any analysis must be based on the task concept. Also, the specific tasks in any application will likely differ by user type so its useful to look at the frequency of specific tasks by user group.

Each task can be looked at in terms of time. The total time is split among the parts. Before worrying about bandwidth, you should determine just where the time is being spent for each task. Don't consider the user action in the task analysis - their keyboard time is best handled with scripts to eliminate that variable, and output is done when the screen is populated or the printout complete.

The communications aspect is impacted by volume of data moved, amount of communications overhead, background load, packet size, protocol, latency, and bandwidth.

While there are many "favorite" tools to speed the analysis, it can all be accomplished with a spreadsheet, a packet capture tool, and a knowledge of scripting.

There are some generals you can follow for this evolution.

First, while applications vary, most have yet to find the application that improves performance on any task when bandwidth goes above about 750Kb. Most see no improvement once bandwidth reaches 200Kb. Additional bandwidth then becomes an issue of user count. Next, most applications do not suffer performance drops until total average utilization goes above 80%.

The best time to define bandwidth requirements is during application development. The reason is that most applications can be tuned to perform with significantly less traffic while still in development, and the traffic is often a good indication of other problems like poor database structure or less than optimal distribution of work. The second best time is before purchasing an application. Often two similar applications will have significantly different WAN performance characteristics and this can be a key decision criteria.

So how much bandwidth is too much? If you can lease less than you currently have and lower your costs, you have too much.

I strongly suggest that you NOT enter directly into discussions with a bandwidth provider while deciding your bandwidth requirements. They're more likely to be focused on "making a sale" than in helping you with your infrastructure decisions. Instead, seek the advice of an independent unbiased broker. They can walk you through the process to finding a solution which best makes business sense to you and your organization.

Michael is the owner of FreedomFire Communications....including DS3-Bandwidth.com and Business-VoIP-Solution.com. Michael also authors Broadband Nation where you're always welcome to drop in and catch up on the latest BroadBand news, tips, insights, and ramblings for the masses.

Streamyx Gombak
Streamyx Hulu Klang
Streamyx Kajang
Streamyx Batu Caves
Streamyx Hulu Langat
Streamyx Kepong
Streamyx Klang
Streamyx Pelabuhan Klang
Streamyx Seri Kembangan
Streamyx Shah Alam
Streamyx Subang Jaya
Streamyx Sungai Buloh
Streamyx List of Buildings
Ez 4g
Streamyx